Posts Tagged ‘woodturning tool’


Woodturning Skew Practice – A Wedding Ring Holder

Mastering the skew takes continuous practice to develop and maintain skills. Alan Lacer recommends turning an egg. To this, I’ll add this ring holder for woodturning skew practice. In addition to convex turning from the egg, I need to practice concave turning with this wedding ring holder. It’s a simple spindle project and only takes […]

Read More...

Transforming An Old Fence Post Into A Rustic Fence Post Vase

I’ve invited Russ Coker from a local club to turn one of his favorite projects, a fence post vase. He salvages old fence posts from Wyoming that are mostly cedar and turns them into a vase. The wood is weathered and very, very irregular. His process is: Mount the wood between centers. Evaluate the wood for features […]

Read More...

Home Made Cole Jaws For Woodturning Large Bowls

I’ve needed a set of large chuck jaws to remount bowls in order to turn their bases. I’ve used jamb chucks successfully but want to expand my options but not pay the high price of commercial cole jaws. So, I’ve made my own 17″ wood jaws to fit my vicmark chuck. Steps: Cut plywood to the size desired. […]

Read More...

Finish Woodturning Rough Turned – Alcohol Soaked Bowl

This is a followup on the rough turned green bowl of a few weeks ago. The bowl is now dry after having been soaked in alcohol. This is about six weeks instead of the year typical (for me) of air drying an typical bowl. In this video I remount the now dry bowl to reform […]

Read More...

A Triple Multi Axis Egg Cup Challenge Answered

After last week’s egg cup, Larry joked “why not an eccentric egg cup”. I took that as a challenge. This triple egg cup is turned from red cedar and finished with beeswax and mineral oil. The turning axis was shifted 1.25″ in three directions 120 degrees apart to turn the hollows for the eggs. It […]

Read More...

Utah Woodturning Symposium Egg Cup – Not On The Clock

While at the Utah Woodturning Symposium, I participated in the Egg Cup Turning contest. In the contest, either two individuals or two teams of two woodturners competed against each other to turn an egg cup as quickly as possible. Many who had participated in previous years turned their egg cup in about 30 seconds. My […]

Read More...

Multi-Axis Turning Screwdriver With Ferrule

A little bit ago, I made a simple handle for a 4-in-1 (actually 6-in-1 but I never use the hex driver). At the time, I noted that eccentric techniques could prevent the screwdriver from rolling easily. Here’s the upgrade. I shifted the turning axis 0.25 inch in opposite directions to turn two opposing flatter curves. […]

Read More...

Reverse Chuck And Finish A Green Turned Bowl

While waiting for my recent wet walnut bowl to dry, I decided to actually finish another one I rough turned several years ago. (It did not really need that long to dry). This bowl I held between a closed chuck and the tailstock to refine the mounting tenon and then to re-turn the exterior. While […]

Read More...

Segmented Woodturning Plans Using MS Powerpoint

I’ve had many request for more information on how I use Microsoft Powerpoint to plan my segmented woodturning projects. This video shows the advanced features I employ. This video is only for those already familiar with Powerpoint. It assumes you understand basic operations and only need a little bit more of an edge so you […]

Read More...

A Natural Edge Bud Vase For Mother’s Day

I needed to make a bud vase to go with the flower I made for Mother’s Day. I chose a wet piece of gum wood and shifted the turning axis to include a natural bark edge. I finished this little vase with walnut oil. Despite the off-axis turning, this is still an easy woodturning project.

Read More...